What should be paid attention to when loading and unloading ultra-small excavators?

At present, we must adapt to more excavators. The handling of ultra-small excavators is very important to us. On the one hand, it is related to our personal safety, on the other hand, it is related to the use of the car itself. What should be paid attention to when loading and unloading?

1. Do not lift the bucket while driving, it should be balanced with the bucket and should not be loaded in large quantities.

2. When the water temperature and lubricating oil temperature of the engine reach the specified value, it can run at full load. When the water temperature and oil temperature exceed the specified lower oil temperature, you can operate, otherwise the engine will be damaged.

3. Ultra-small excavators are used for loading and short-distance transportation of bulk materials. It is forbidden to use buckets for excavation work.

4. When the front and rear body forms an angle, shoveling is prohibited. Before picking up the cargo, the front and rear bodies should be straight, aligned and close to the pile, and the bucket should be in contact with the ground and then pick up the cargo.

5. Before the driver leaves the vehicle, the bucket should be placed on the ground. It is forbidden to leave the vehicle when the bucket is hanging. It is forbidden to use buckets to lift personnel to high places for work.

6. When dumping truck materials, the bucket should not be scratched when it rotates forward, and the unloading action should be eased. When unloading the truck, be careful not to scratch the compartment with the bucket. In the case of pushing or scraping, it should be at all times. Observe the operation and find that the vehicle has been blocked in advance. It should be handled with caution and not forcibly pushed forward. 18/11/3